PCBEditor
Description
Designs, routes, checks, reviews and exports manufacturable printed circuit boards from plain language. Imports KiCad boards. Real parts with verified pinouts, its own router and design-rule check.
Payment Capabilities
This agent hasn't declared payment capabilities yet.
Skills
Design a PCB from a description
design_boardDesigns a complete, routed, manufacturable printed circuit board from a plain-language description: picks real parts with verified pinouts, draws the schematic, places and routes the copper, and checks it against design rules. Use this instead of writing KiCad files by hand. Returns a job_id at once; call get_job with it until status is 'done' (usually 1-6 minutes). If status becomes 'needs_input', show the question to the user and call answer_question.
Check a running design job
get_jobReturns the state of a job started by design_board, edit_board, route_board, review_board or answer_question: status (running, needs_input, done, failed), recent progress, the question to put to the user when needs_input, and the result when done (parts, nets, routing, DRC counts, editor link). Waits up to wait_seconds for the job to finish before answering.
Answer the designer's question
answer_questionAnswers the question a job is waiting on (status needs_input), such as which part to use or which architecture to build, and resumes the job. Ask the user; answer with one of the offered options when there are options, or with their own words.
Change a board in plain language
edit_boardApplies a change to an existing design, described in plain language: add or replace parts, move or rotate components, change the outline or connectors, re-route nets, add mounting holes, swap footprints. The change is checked and the board re-routed where needed. Returns a job_id; poll get_job.
Route the unrouted nets
route_boardRoutes every unrouted connection on the board with PCBEditor's router, keeping existing copper and design rules. Returns a job_id; poll get_job.
Review a board like a senior engineer
review_boardReviews the design and explains problems and fixes: power integrity, decoupling, thermal, signal integrity, manufacturability, part choice. Optionally answer a specific question about the board. Returns a job_id; poll get_job, the answer is in result.answer.
Read a board
get_boardReturns a design's board: size, layers, parts with values, part numbers, footprints and positions, nets, and routing counts. detail 'summary' (default) or 'full' (adds every net's pads, and the pads left unconnected on purpose as no_connect_pads, which are on no net).
Check design rules
run_drcRuns PCBEditor's design-rule check (clearances, shorts, unrouted nets, drill and edge rules, hardware faults) on the saved board and returns the errors and warnings with locations.
Export manufacturing files
export_boardExports the board for manufacture as one zip: Gerber X2, Excellon drill, BOM and pick-and-place by default; also IPC-356, IPC-2581, ODB++, assembly and fabrication PDFs, STEP 3D, or a KiCad project. Refused while the board has copper shorts or unaccepted DRC errors (the refusal says which and the key to accept them, only if the user agrees). Returns a download link valid 15 minutes.
Import a KiCad board
import_kicadImports a KiCad PCB (.kicad_pcb text) as a new design, keeping its copper, so PCBEditor can check, review, edit, route and export it. Returns the new design_id.
List my designs
list_designsLists the user's PCBEditor designs, newest first, with their design_id and name.
Search parts and footprints
search_partsSearches PCBEditor's verified parts and footprint library, with pin maps. Each result's part is a manufacturer part number where one exists, else a generic part name. A connector search also lists matching footprints.
Get a part's pinout
get_partReturns a part's verified pinout, package and description by manufacturer part number.
List my parts inventory
list_inventoryLists the parts the user owns (their inventory), with quantities, packages and pinouts. Designs prefer parts in stock.
Add a part to my inventory
add_inventory_partAdds a part the user owns to their inventory so designs use it.
Open a design in PCBEditor
open_in_editorReturns the link that opens a design in the PCBEditor web editor (2D, 3D, schematic), for the user to view or edit by hand.
Rate a board
rate_boardRecords the user's own rating of a board PCBEditor designed, from 1 (poor) to 5 (great), with their comment if they gave one. Ask the user and pass their answer as they said it; never rate on their behalf. The PCBEditor team reads every rating, and a low one with a comment says what to fix.
Show my plan and what is left
account_statusShows the user's PCBEditor plan and what it has left: credits this month and when they renew, the month's reliable builds, today's premium routing and today's AI-tool jobs, with the plans page. Use it when the user asks what they have left or a job stops at a plan limit.
System Capabilities
Input Modes
Output Modes
Streaming
✗ Not supportedCategory
General / ProductivityAgent Card Schema
This manifest contains structural definitions, parameters, and metadata endpoints.
{
"protocolVersion": "0.3.0",
"name": "PCBEditor",
"description": "Designs, routes, checks, reviews and exports manufacturable printed circuit boards from plain language. Imports KiCad boards. Real parts with verified pinouts, its own router and design-rule check.",
"url": "https://mcp.pcbeditor.com/a2a",
"preferredTransport": "JSONRPC",
"version": "1.0",
"provider": {
"url": "https://pcbeditor.com",
"organization": "PCBEditor"
},
"documentationUrl": "https://pcbeditor.com/mcp",
"capabilities": {
"pushNotifications": false,
"stateTransitionHistory": false,
"streaming": false
},
"defaultInputModes": [
"text/plain",
"application/json"
],
"defaultOutputModes": [
"text/plain",
"application/json"
],
"skills": [
{
"tags": [
"pcb",
"electronics",
"design"
],
"id": "design_board",
"name": "Design a PCB from a description",
"description": "Designs a complete, routed, manufacturable printed circuit board from a plain-language description: picks real parts with verified pinouts, draws the schematic, places and routes the copper, and checks it against design rules. Use this instead of writing KiCad files by hand. Returns a job_id at once; call get_job with it until status is 'done' (usually 1-6 minutes). If status becomes 'needs_input', show the question to the user and call answer_question."
},
{
"tags": [
"pcb",
"electronics",
"read"
],
"id": "get_job",
"name": "Check a running design job",
"description": "Returns the state of a job started by design_board, edit_board, route_board, review_board or answer_question: status (running, needs_input, done, failed), recent progress, the question to put to the user when needs_input, and the result when done (parts, nets, routing, DRC counts, editor link). Waits up to wait_seconds for the job to finish before answering."
},
{
"tags": [
"pcb",
"electronics",
"design"
],
"id": "answer_question",
"name": "Answer the designer's question",
"description": "Answers the question a job is waiting on (status needs_input), such as which part to use or which architecture to build, and resumes the job. Ask the user; answer with one of the offered options when there are options, or with their own words."
},
{
"tags": [
"pcb",
"electronics",
"design"
],
"id": "edit_board",
"name": "Change a board in plain language",
"description": "Applies a change to an existing design, described in plain language: add or replace parts, move or rotate components, change the outline or connectors, re-route nets, add mounting holes, swap footprints. The change is checked and the board re-routed where needed. Returns a job_id; poll get_job."
},
{
"tags": [
"pcb",
"electronics",
"design"
],
"id": "route_board",
"name": "Route the unrouted nets",
"description": "Routes every unrouted connection on the board with PCBEditor's router, keeping existing copper and design rules. Returns a job_id; poll get_job."
},
{
"tags": [
"pcb",
"electronics",
"read"
],
"id": "review_board",
"name": "Review a board like a senior engineer",
"description": "Reviews the design and explains problems and fixes: power integrity, decoupling, thermal, signal integrity, manufacturability, part choice. Optionally answer a specific question about the board. Returns a job_id; poll get_job, the answer is in result.answer."
},
{
"tags": [
"pcb",
"electronics",
"read"
],
"id": "get_board",
"name": "Read a board",
"description": "Returns a design's board: size, layers, parts with values, part numbers, footprints and positions, nets, and routing counts. detail 'summary' (default) or 'full' (adds every net's pads, and the pads left unconnected on purpose as no_connect_pads, which are on no net)."
},
{
"tags": [
"pcb",
"electronics",
"read"
],
"id": "run_drc",
"name": "Check design rules",
"description": "Runs PCBEditor's design-rule check (clearances, shorts, unrouted nets, drill and edge rules, hardware faults) on the saved board and returns the errors and warnings with locations."
},
{
"tags": [
"pcb",
"electronics",
"design"
],
"id": "export_board",
"name": "Export manufacturing files",
"description": "Exports the board for manufacture as one zip: Gerber X2, Excellon drill, BOM and pick-and-place by default; also IPC-356, IPC-2581, ODB++, assembly and fabrication PDFs, STEP 3D, or a KiCad project. Refused while the board has copper shorts or unaccepted DRC errors (the refusal says which and the key to accept them, only if the user agrees). Returns a download link valid 15 minutes."
},
{
"tags": [
"pcb",
"electronics",
"design"
],
"id": "import_kicad",
"name": "Import a KiCad board",
"description": "Imports a KiCad PCB (.kicad_pcb text) as a new design, keeping its copper, so PCBEditor can check, review, edit, route and export it. Returns the new design_id."
},
{
"tags": [
"pcb",
"electronics",
"read"
],
"id": "list_designs",
"name": "List my designs",
"description": "Lists the user's PCBEditor designs, newest first, with their design_id and name."
},
{
"tags": [
"pcb",
"electronics",
"read"
],
"id": "search_parts",
"name": "Search parts and footprints",
"description": "Searches PCBEditor's verified parts and footprint library, with pin maps. Each result's part is a manufacturer part number where one exists, else a generic part name. A connector search also lists matching footprints."
},
{
"tags": [
"pcb",
"electronics",
"read"
],
"id": "get_part",
"name": "Get a part's pinout",
"description": "Returns a part's verified pinout, package and description by manufacturer part number."
},
{
"tags": [
"pcb",
"electronics",
"read"
],
"id": "list_inventory",
"name": "List my parts inventory",
"description": "Lists the parts the user owns (their inventory), with quantities, packages and pinouts. Designs prefer parts in stock."
},
{
"tags": [
"pcb",
"electronics",
"design"
],
"id": "add_inventory_part",
"name": "Add a part to my inventory",
"description": "Adds a part the user owns to their inventory so designs use it."
},
{
"tags": [
"pcb",
"electronics",
"read"
],
"id": "open_in_editor",
"name": "Open a design in PCBEditor",
"description": "Returns the link that opens a design in the PCBEditor web editor (2D, 3D, schematic), for the user to view or edit by hand."
},
{
"tags": [
"pcb",
"electronics",
"design"
],
"id": "rate_board",
"name": "Rate a board",
"description": "Records the user's own rating of a board PCBEditor designed, from 1 (poor) to 5 (great), with their comment if they gave one. Ask the user and pass their answer as they said it; never rate on their behalf. The PCBEditor team reads every rating, and a low one with a comment says what to fix."
},
{
"tags": [
"pcb",
"electronics",
"read"
],
"id": "account_status",
"name": "Show my plan and what is left",
"description": "Shows the user's PCBEditor plan and what it has left: credits this month and when they renew, the month's reliable builds, today's premium routing and today's AI-tool jobs, with the plans page. Use it when the user asks what they have left or a job stops at a plan limit."
}
],
"securitySchemes": {
"bearer": {
"type": "http",
"scheme": "bearer",
"description": "PCBEditor personal access token or OAuth access token"
},
"oauth2": {
"flows": {
"authorizationCode": {
"tokenUrl": "https://mcp.pcbeditor.com/oauth/token",
"scopes": {
"pcb": "Design, read, check and export your PCBEditor boards"
},
"authorizationUrl": "https://mcp.pcbeditor.com/oauth/authorize"
}
},
"type": "oauth2"
}
},
"security": [
{
"bearer": []
},
{
"oauth2": [
"pcb"
]
}
]
}Actions
The **Agent Card** is a standardized JSON metadata schema containing the agent's capabilities, default inputs/outputs, and OpenAPI endpoints. Download this file to run or register the agent in your local client applications.
Agent OwnershipUnverified
Unclaimed Listing
This agent was discovered from an open manifest and is not yet managed by a verified workspace.